CONTROLS
4. Move the remote control lever fully to the "R"
(Reverse) side (1).
Return the lever to the "N" (Neutral) position (2)
slowly.
5. With the lever returned to the "N" (Neutral) position,
draw Mark (B) (3) on the inner cable (4) at the end of
cable outer seal (5).
6. Draw Mark (C) (1) at the mid point between the mark
(A) (2) and mark (B) (3) on the inner cable.
7. Align mark (C) (1) with the cable outer seal end.
8. Push the shift link pin (1) lightly and set the shift link
to the center of the play (2) as shown.
20-4
(4)
(5)
(3)
(1)
(3)
(2)
(1)
(1)
(2)
(2)
(1)