TOHATSU BFT115A Service Manual page 209

Connect the pressure regulator control tube (1) to the
intake manifold joint (2).
Install the L. side cover bracket (1) and tighten the two
bolts (2).
Install the following:
– Throttle body (page 5-85)
– L. engine under cover (page 6-4)
FUEL INJECTORS/FUEL PRESSURE
REGULATOR REMOVAL/
INSTALLATION
Gasoline is highly flammable and explosive.
You can be burned or seriously injured when han-
dling fuel.
• Keep heat, sparks, and flame away.
• Wipe up spills immediately.
• Handle fuel only outdoors.
REMOVAL
Disconnect the battery cable from the battery negative
(–) terminal.
Remove the L. engine under cover (page 6-4).
Relieve the fuel pressure (page 5-79).
Remove the two bolts (1) and slide the L. side cover
bracket (2).
(2)
(1)
FUEL SYSTEM
(1)
(2)
(1)
(2)
5-91