TOHATSU BFT115A Service Manual page 282

ENGINE COVER/COVER LOCK
ASSEMBLY
Install the bracket cap (1).
Apply marine grease to the shaft area of the front lock
(2) and cover lock bushing (3) whole surface.
Apply marine grease to the cover lock hook spring (4)
whole surface and install it into the front lock hole (5).
Turn the front lock as shown, then slightly lean the front
lock and install it into the under cover front bracket (6).
Insert the other end of the cover lock hook spring into
the under cover front bracket hole (7).
Apply marine grease to the cover lock bushing A (8)
whole surface and install it into the under cover front
bracket.
Install the washer (9) and E-ring (10) to the front lock.
Apply marine grease to the whole surfaces of cover
open shaft (1), lock lever return spring (2), washer (3)
and cover lock bushing B (4).
Install the lock lever return spring, washer and cover
lock bushing B to the cover open shaft.
Compress the lock lever return spring by sliding the
cover lock bushing B as shown.
Slightly lean the cover open shaft as shown and install it
into the under cover front bracket (5).
Install the cover lock bushing B into the under cover
front bracket.
Install the E-ring to the cover open shaft.
6-24
(6)
(9)
(1)
(3)
(6)
(2)
(5)
(1)
(4)
(10)
(8)
(7)
(4)
(5)
(2)
(2)
(3)