TOHATSU BFT115A Service Manual page 203

THROTTLE BODY REMOVAL/
INSTALLATION/CLEANING
REMOVAL
Remove the silencer case (page 5-83).
Disconnect the MAP sensor 3P connector (1) and
release the harness band clip (2).
Release the water level sensor 2P connector (1) from
the sensor wire bracket (2).
Disconnect the TP sensor 3P connector (3) and release
the harness band clip (4) from the sensor wire bracket.
THROTTLE BODY
THROTTLE ROD
Do not loosen the
throttle rod lock nut.
BOLT (8 × 60 mm) (4)
22 N·m (2.2 kgf·m, 16 lbf·ft)
(3)
THROTTLE BODY PACKING
FUEL SYSTEM
(1)
(4)
INTAKE
MANIFOLD
(2)
(2)
(1)
5-85