TOHATSU BFT115A Service Manual page 324

STARTING SYSTEM
Apply grease to the sliding surface of the clutch fork (1).
Set the clutch fork in the indicated position of the
overrunning clutch groove (2) as shown.
Install the overrunning clutch (1) assembly on the front
bracket (2).
• Install the overrunning clutch by aligning the
projections (3) on the outer surface of the ring gear
with the grooves (4) in the front bracket.
Install the packing (1).
• Install the packing by aligning the projections (2) on
the packing with the grooves (3) in the front bracket
(4), and aligning the notches (5) on the packing with
the bolt hole (6) in the front bracket.
Apply grease to the planetary gears (1), steel ball (2),
and internal gear (3).
Install the planetary gears, steel ball, and internal gear.
9-12
(1)
(4)
(2)
(1)
(6)
(4)
(1)
(2)
(3)
(1)
(5)
(2)
(3)
(2)
(3)