TOHATSU BFT115A Service Manual page 56

SERVICE INFORMATION
VIEWED FROM THE LEFT REAR SIDE:
BREATHER
TUBE
(12 x 740 mm)
FUEL TUBE E
SENSOR HOSE CLIP
(NOTE 1)
TUBE CLIPS
LC and XC types:
FUEL TUBE
TUBE E CLIP B12
NOTE 1 Hose clip installation
2-40
TUBE CLAMP
D17.0
WATER RELIEF
TUBE A
FUEL TUBE CLIP
FUEL
(14 mm)
TUBE D
Clamp the fuel tube B.
LU, LD, XU, XD and XCD types:
FUEL
TUBE D
FUEL
TUBE E
FUEL TUBE CLIP (14 mm)
Install aligning the end of the fuel tube clip (14
mm) with the white mark on the air vent tube.
AIR VENT TUBE A
FUEL TUBE CLIP (14 mm)
FUEL TUBE B
FUEL TUBE CLIP (14 mm)
· Clamp the fuel tube B.
·
Check the fuel tube B protection tube for
protrusion from the end of the fuel tube
clip (14 mm). The protection tube should
protrude 2 mm (0.1 in) max. from the clip.
TUBE
CLIP B1
(14.5 mm)
TUBE
CLIP B1
(14.5 mm)
FUEL
TUBE D
TUBE
CLAMP D12
AIR VENT
TUBE A
WHITE
MARK
FUEL TUBE CLIP
(14 mm)
FUEL TUBE B
2 mm (0.1 in)
max.
FUEL TUBE CLIP (14 mm)
page 2-41