FUSES
Electric Starter Will Not
Operate
The 10 A, 15 A, and 30 A main fuses
protect the electric starter relay and
related circuits.
The 10 A (No. 5) main fuse protects
the ignition switch and related
circuits. If this fuse blows, the engine
will not start or run, and the power
trim/tilt switch will not activate the
trim/tilt mechanism.
Battery Will Not Charge
A 100 A ACG fuse protects the
alternator circuit. If the ACG fuse
blows, the engine will not charge the
battery. Refer to p. 97.
TAKING CARE OF UNEXPECTED PROBLEMS
Fuse Replacement
Disconnect the battery cable at the
battery negative ( – ) terminal before
replacing the fuse.
Failure to do so may cause a short
circuit.
Main Fuse
1. Stop the engine and disconnect the
battery cable.
2. Remove the engine cover.
SPARE FUSES
(10 A, 15 A, 30 A)
(2)
(1)
45°
3. Remove the junction box lid.
FUSE PULLER
FUSE
HOLDER
10 A (No. 5) MAIN FUSE
JUNCTION
BOX LID
RELAYS
(Do not remove the relays)
FUSES (10 A, 15 A, 30 A)
95