TOHATSU BFT115A Service Manual page 606

MOUNT
MOUNTING CASE REMOVAL/
INSTALLATION
Place the outboard motor on a level surface so it is in
the vertical position.
Remove the engine (page 13-3).
Swivel the outboard motor right and left, then remove
the two nuts (1).
Remove the mounting case (1) from the mounting
frame (2).
Installation is in the reverse order of removal.
TORQUE: 83 N·m (8.5 kgf·m, 61 lbf·ft)
(2)
18-4
(1)
(1)
(1)