TOHATSU BFT115A Service Manual page 638

TRIM/TILT
Remove the four bolts (1) and power tilt motor (2).
Remove the O-ring (1) from the power tilt motor (2).
Remove the drive joint (1) and filter B (2) from the pump
assembly (3).
Check the mesh of the filter B for blockage and tear.
If it is torn, replace it with a new one.
If it is clogged with dust and dirt, blow the mesh with air
to remove the blockage, being careful not to damage
the mesh.
Remove the following:
– Socket bolt A (1)
– Two socket bolts B (2)
– Pump assembly (3)
– Five O-rings (4)
– Orifice collar (5)
– Reservoir valve (6)
– Pin (7)
– Steel ball (8)
19-26
(1)
(1)
(2)
(6)
(3)
(4)
(2)
(1)
(2)
(1)
(2)
(3)
(7)
(8)
(5)