TOHATSU BFT115A Service Manual page 356

COOLING SYSTEM
WATER RELIEF TUBE REMOVAL/INSTALLATION
Remove the following:
– Engine cover
– L. engine under cover (page 6-4)
– R. engine under cover (page 6-10)
Disconnect the water relief tube A (1) from the thermostat cover (2).
Remove the water tube clamp (3) from the water relief tube A and main wire harness (4).
Disconnect the tube (7 x 90 mm) (5), tube (7 x 120 mm) (6) and water tube E (7) from the engine side.
Release the water relief tube B (8) from the water tube clamp B (9).
Disconnect the water relief tube C (10) from the relief valve cover (11).
Disconnect the tube (7 x 160 mm) (12) from the oil filter flange (13).
Disconnect the tube (7 x 40 mm) (14) from the exhaust guide (15).
Installation is in the reverse order of removal.
(3)
(1)
(8)
11-6
(4)
(5)
(6)
(7)
(9)
(11)
(15)
(2)
(13)
(12)
(10)
(14)