CYLINDER HEAD
Remove the A/F sensor 4P connector (1) from the
harness clip bracket C (2) and disconnect it.
Remove the harness band clip (3) from the harness clip
bracket C.
Remove the three bolts (4) and harness clip bracket C.
Remove the two bolts (1) and harness clip bracket B
(2).
Release the main wire harness (3) from the tabs (4) of
the chain case.
14-12
(1)
(3)
(3)
(4)
(4)
(4)
(2)
(1)
(2)
(4)