Table of Contents
Advertisement
6.
Disconnect rod snap lower and upper, and remove starter
lock rod.
Disconnect wires from igniter 8.
7.
Disconnect ground wire from cylinder.
8.
Turn throttle grip to full close position, and disconnect
throttle cables 9 (2 pcs.) from throttle drum 0.
Remove bolts q (6 pcs.), and then, lift power unit to
9.
remove.
When lifting power unit, perform the work carefully
and check if cables and hoses are not jammed by
other components.
4) Removal and Disassembly of Crank
Case Head
Remove bolts and remove crank case head ass'y 1.
1.
4st 4/5/6 2020
9
q q
1
8 8
5
0
5-19
Advertisement
Table of Contents
