TOHATSU BFT115A Service Manual page 208

FUEL SYSTEM
INSTALLATION
Install the four new intake manifold packings (1) to the
intake manifold (2) by aligning the tabs (3) of the
packings with the grooves (4) of the intake manifold.
Install the intake manifold to the engine.
• Take care not to pinch the pressure regulator return
hose (5) and air vent tube (6) with the upper side of
intake manifold.
Install the three bolts (8 × 35 mm) (1), two bolts (8 × 35
mm) (2) and two nuts (3).
Tighten the bolts and nuts to the specified torque in the
numbered order in two or three steps.
TORQUE: 26 N·m (2.7 kgf·m, 19 lbf·ft)
Connect the IAC valve 2P connector (1).
5-90
(1)
(3)
(4)
(2)
(1) (3)
(2)
2
3
(6)
(5)
4
6
1
7
5
(1)