TOHATSU BFT115A Service Manual page 431

CYLINDER HEAD DISASSEMBLY/
ASSEMBLY
DISASSEMBLY
Remove the cylinder head (page 14-35).
Use an appropriate tool (1) that matches the diameter
of the valve spring retainer.
Attach the tool to the retainer and lightly tap the tool
with a plastic hammer (2) to separate the valve keepers
from the retainer.
• Tap at right angles with each valve stem head. Be
careful not to bend the valve.
Change the attachment of the special tool as shown.
Compress the valve springs and remove the valve
keepers (1) using the special tools.
TOOLS:
Valve spring compressor (2)
Valve spring compressor
attachment (3)
• Take care not to let the special tools contact the
cylinder head.
• Identify the valve keepers so they can be reinstalled
in their original locations.
Remove the remaining valve keepers.
(3)
07757-0010000
07757-PJ10100
(2)
CYLINDER HEAD
(1)
(2)
(2)
Remove
(1)
14-39