ENGINE COVER/COVER LOCK
Position the power tilt switch wire on the upper side of
the R. engine under cover and pull the hose with the
flush plug cap out of the R. engine under cover.
Install the R. engine under cover (1) by aligning its
lower side (2) with the extension case (3).
Install the tab (1) of the front side (swivel case side) of
L. engine under cover (2) into the grooves (3) of the R.
engine under cover (4).
Install the hole (1) of the R. engine under cover (2) onto
the boss (3) of the R. side cover bracket (4).
6-12
(3)
(4)
(3)
(3)
(1)
(2)
(2)
(1)
(2)
(1)
(4)