TOHATSU BFT115A Service Manual page 675

EXPLODED VIEW
OIL SEAL
SEAL HOLDER
O-RING (25 x 2.4 mm)
CABLE BRACKET A
INSTALLATION
Apply marine grease to a new O-ring (1) outer surface.
Apply marine grease to the O-ring installation area of
the seal holder (2) and shift shaft B bearing area.
Apply soapy water to a new Oil seal (3) outer surface.
Install the oil seal and O-ring to the seal holder.
BOLT (6 x 20 mm) (2)
SHIFT SHAFT B
BOLT (6 x 14 mm)
(1)
CONTROLS
(3)
(2)
20-13