TOHATSU BFT115A Service Manual page 273

COVER LOCK CABLE REMOVAL/
INSTALLATION
REMOVAL
Remove the following:
– Engine cover
– Front separate cover (page 6-3)
– L. engine under cover (page 6-4)
– R. engine under cover (page 6-10)
Remove the vinyl tube (1) and fuel tube (2) from the
under cover front bracket (3).
Loosen the lock nut (4) of the cover lock cable A (5) and
disconnect the cable from the front lock (6).
Loosen the lock nuts (1) of the cover lock cable A (2)
and cover lock cable B (3), then disconnect the cables
from the L. side lock (4).
Loosen the lock nut (1) of the cover lock cable B (2) and
disconnect the cable from the R. side lock (3).
INSTALLATION/ADJUSTMENT
Set the adjusting nut position of cover lock cable A (1)
(longer cable) to the measurement as shown.
ENGINE COVER/COVER LOCK
(1)
(3)
(2)
(2) (1)
(4)
(2)
20 mm (0.8 in)
FRONT BRACKET
13 mm (0.6 in)
(1)
(6)
(4)
(5)
(1) (3)
(3)
(1)
L
L. SIDE LOCK
6-15