TOHATSU BFT115A Service Manual page 285

UNDER COVER SEAL B
REPLACEMENT
Remove the extension case (1).
– Standard rotation type (page 16-12)
– Counter rotation type (page 17-12)
Remove the under cover seal B (2).
Clean the seal installation surface of extension case.
Apply adhesive (Threebond® 1530C or equivalent) to
the specified area (3) as shown.
Install the under cover seal B.
Allow the adhesive to dry for approximately 1 – 2 hours.
• Allow the adhesive to dry completely (approximately
24 hours) before running the outboard motor.
• Do not let the adhesive to stick out side of the
specified area (4).
ENGINE COVER/COVER LOCK
(1)
(3)
(2)
(4)
(2)
(3)
(3)
(1)
6-27