TOHATSU BFT115A Service Manual page 337

INSTALLATION
• Be careful not to press the fuel tube A with the
remote control cable grommet.
Connect the 14P connector (1) of the switch panel
cable and 6P connector (2) of the indicator wire
harness, then install them to the neutral switch bracket
(3).
Make sure the white tape (1) on the starter cable (2)
aligns with the edge of the remote control cable
grommet (3).
Pass the fuel tube A (4), indicator wire harness (5),
switch panel wire harness (6) into the remote control
cable grommet.
OTHER ELECTRICAL
(2)
(3)
(3)
(6)
(5)
(5)
(2)
(1)
(2)
(1)
(3)
(4)
(6)
(4)
10-7