TOHATSU BFT115A Service Manual page 520

GEAR CASE (STANDARD ROTATION)
PROPELLER SHAFT INSTALLATION
Apply gear oil to the circumference of a new bearing
(1).
Install the bearing to the reverse bevel gear (2) using
the special tools and hydraulic press.
TOOLS:
Driver (3)
Attachment, 62 × 68 mm (4)
Pilot, 35 mm (5)
Apply soapy water to the outer circumference and
marine grease to the mating surfaces of new water
seals (1).
Install the water seals into the propeller shaft holder (2)
in the direction as shown, using the special tool.
TOOL:
Oil seal driver, 44.5 mm (3)
After installation, apply marine grease to the lips of the
water seals.
16-26
(3)
07749-0010000
07746-0010500
07746-0040800
(1)
<Water seal installation direction>
07947-SB00100
(1)
(5)
(3)
(4)
(2)
(1)
(2)