TOHATSU BFT115A Service Manual page 293

ALTERNATOR BRACKET REMOVAL/
INSTALLATION
Remove the flange bolt (6 × 16 mm) (1) and alternator
stay (2).
Remove the special adjuster bolt (3) and tensioner bolt
(4).
Remove the four bolts (8 × 28 mm) (5) and alternator
bracket (6).
Remove the two bolts (8 × 20 mm) (7) and engine
hanger B (8).
Installation is in the reverse order of removal.
Tighten the bolts (6 × 16 mm) while pushing the
alternator stay against the projection (9) of the
alternator bracket.
(7)
(8)
(5)
(4)
CHARGING SYSTEM
(6)
(9)
(2)
(1)
(3)
7-7