TOHATSU BFT115A Service Manual page 669

SHIFT LINK BRACKET REMOVAL/
INSTALLATION
Remove the following:
– Front separate cover (page 6-3)
– Shift control cable (page 20-3)
– Throttle control cable (page 20-6)
– Switch panel cable/indicator wire harness (page 10-6)
Remove the linkage pivot (1) of the throttle rod (2) from the throttle plate (3).
Remove the two bolts (4).
Remove the shift link bracket (5) by releasing the link
pin (6) from the shift arm (7).
Installation is in the reverse order of removal.
(7)
(2)
(1)
(6)
CONTROLS
(3)
(4)
(5)
20-7