Show Route-Map - Dell S6000 Reference Manual

route-map hopper permit 10
Dell(config-route-map)#

show route-map

Display the current route map configurations.
S6000
Syntax
show route-map [map-name]
Parameters
map-name
Command
•
Modes
•
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Version 8.1.1.0
Version 7.8.1.0
Version 7.6.1.0
Version 7.5.1.0
pre-Version
6.1.1.0
Example
Dell#show route-map
route-map firpo, permit, sequence 10
Match clauses:
Set clauses:
Dell#
Related route-map
Commands
Access Control Lists (ACL)
(OPTIONAL) Enter the name of a configured route map, up
to 140 characters.
EXEC
EXEC Privilege
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the E-Series ExaScale.
Increased the name string to accept up to 140 characters.
Prior to 7.8.1.0, names are up to 16 characters long.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
tag 34
— configures a route map.
259