Chapter 4
4.2 Step-by-Step
Procedure
STEP
1.
Locate and unpack the Cabinet box.
2.
Locate Power Strip at bottom-left (looking
through the front) of cabinet and feed power cable
through the power opening at rear of cabinet.
3.
Plug power strip power cable into AC outlet.
Make sure the ON/OFF switch on the upper right
outside of the cabinet is in the OFF position.
Note: The power switch will be lit when the
power strip is in the ON position.
Page 4-2
The following are the steps and procedures for the installation of the VisuaLink
128/384.
ACTION
VisuaLink 128/384 Quick Installation Guide
DRAWING
Powerstrip
Power Switch
NDA-24232 Revision 1.0