Level:
IN
Description
Use Program 90-58 : Restore Recovery Data to select the recovery data stored in the flash memory of
the GCD-CP10. After this command is executed, the system restarts automatically.
This program is available only via telephone programming and not through PC
Programming.
NOTE
Input Data
Data ID
Item
Item
No.
01
Restore Recovery Data
Conditions
None
Feature Cross Reference
None
2-878
Program 90 : Maintenance Program
90-58 : Restore Recovery Data
Input Data
[Restore & Reset?] : Dial 1+ press Transfer
(Press Transfer to cancel.)
1~5
Program 90 : Maintenance Program
Issue 4.0