Document Revision 1A
___________________________________________________________________________________
6.6
___________________________________________________________________________________
4 - 28
Update Firmware
The Update Firmware page allows the installer to update the CNF(16)-U20
ETU with new firmware via web browser.
A successful firmware upgrade reverts all system configuration to default settings.
Make note of the card configuration prior to performing a firmware upgrade.
Figure 4-24 Update Firmware Screen
Firmware Update:
1.
The Installer must store the firmware on their local PC.
2.
After the file is selected, the installer may click Update to start the
transfer.
3.
The CNF(16)-U20 ETU transfers the file to the ETU and verifies that the
checksum information is correct.
Electra Elite IPK II
CNF(16)-U20 ETU Web Manager