Volume Function; Indirect Measurement - Leica DISTO D210XT User Manual

Adding and subtracting areas
EN
Calling up the area function and measuring areas.
D
Press or
N
1x briefly: takes first distance measurement
(e.g. length)
S
1x briefly: takes second distance measurement
FIN
(e.g. width)
DK
The result of the second area measurement, "+" flashes.
1x briefly: confirms the addition; the added area
SLO
results are displayed in the summary row.
TR

Volume function

GR
2x briefly: the
ROK
1x briefly: takes first distance measurement
RUS
(e.g. length)
SK
1x briefly: takes second distance measurement
(e.g. width)
CZ
The result of the area measurement from the values
H
already measured is displayed in the summary row.
1x briefly: takes the third distance measure-
PL
ment (e.g. height). The value is displayed in
EST
intermediate line 1.
LT The calculated volume appears in the summary line,
the last three measured values appear in interme-
LV
diate lines 1, 2, 3.
Press the button for longer to display additional
BG
RO Functions
.
symbol is displayed.
room information such as circumference
ceiling/floor area

Indirect Measurement

The instrument can measure distances with the
Pythagoras method. This procedure facilitates in
measuring distances that are difficult to access.
Adhere to the prescribed sequence of meas-
urements:
• All target points must be vertical or horizontal on
the surface of the wall.
• The best results are achieved when the intrument
is rotated around a fixed point (e.g. the stop
bracket is fully extended and the instrument is
placed against a wall).
• To take the measurement, the minimum/
maximum function can be called up. The minimum
value is used for measurements that must be at
right-angles to the target; the maximum distance
is used for all other measurements.
Make sure that the first measurement and the
distance to be measured are at right angles. Use the
minimum/maximum function.
8
,
, surface area of the walls
Leica DISTO™ D210XT 776114
.