Reference Information
Miscellaneous Reference Information
Websites with Additional PNA Information Related to CalPods
— Keysight 855xxA/B Series CalPod Information
http://na.support.keysight.com/pna/calpod
— Keysight 855xxA/B Series CalPod Performance Characteristics
http://na.support.keysight.com/pna/calpod/calpod_pc_85523-90003.pdf
— Keysight 855xxA/B Series CalPod Performance Information in PNA Online Help
http://na.support.keysight.com/pna/calpod/calpod_help.htm
— Network Analyzer Firmware http://na.support.keysight.com/pna/firmware
— General PNA Documentation http://na.support.keysight.com/find/pna
85523B Calpod Controller Dimensions and Weight
— Height: 89 mm
— Width: 425 mm —
Depth: 500 mm
— Weight: 7.5 kg
85523B CalPod Controller Front Panel Output Connectors
— Connector type: LEMO USA ECG.2B.312.CLV (Keysight part number 1254-1449)
— Maximum output: +/- 15 VDC
CalPod Operational Check
A CalPod module may be tested using the CalPod Operational Check. For
instructions, refer to the CalPod portion of PNA Online Help at:
http://na.support.keysight.com/pna/calpod/calpod_help.htm#OpCheck
Calibration Types Not Supported by CalPods
Keysight 855xxA/B Series CalPods support almost all PNA S-parameter calibration
types. The exceptions are calibration types that do not include a return loss portion
for the port connected to the CalPod. An example of an unsupported calibration
type is a Response Calibration.
2-2
1
85563-90005 Operation & Service Guide