Rear Axle Carrier Disassembly; Remove Abs Speed Sensor - Toyota Celica 2000 Repair Manual

t
-
SUSPENSION AND AXLE
DISASSEMBLY
wl ABS:

REMOVE ABS SPEED SENSOR

Using a pin punch and hammer,
(a)
remove the 2 attachments from SST.
SST
Mount the axle hub assembly in a soft jaw vise.
(b)
NOTICE:
Replace the axle hub assembly if it is dropped or a strong
shock is given to it.
Using SST and 2 bolts (Diameter: 1 2 mm, Pitch: 1 .5 mm),
(c )
remove the ABS speed sensor.
SST
NOTICE:
•
Do not allow any foreign matter sticking to the sensor
rotor.
•
Pull out the ABS speed sensor straightly not to dam­
age the sensor rotor.
If damage has occurred to the sensor rotor, replace
the axle hub assembly.
•
Do not scratch the contacting surface of the axle hub
and speed sensor.
REAR AXLE CARA!EA
09520-00031 (09520-00040, 0952H l0020)
09520-00031 (09520-00040, 09521 -{)0020),
09950-00020
SA-57
dr i v e
out the 2 pins and