Table of Contents
Advertisement
RA-8
REAR AXLE AND SUSPENSION - Rear Axle Hub and Carrier
C9701
C9704
FA1635
C9706
(b)
Remove the two axle carrier set nuts and two bolts
with the camber adjusting cam.
(c)
Remove the rear axle carrier and axle hub.
CAUTION:
Cover the drive shaft boot with cloth to
protect it from damage.
DISASSEMBLY OF REAR AXLE HUB AND
CARRIER
(See page RA-6)
1.
REMOVE DUST DEFLECTOR
(a)
Clamp the rear axle hub and carrier in a soft jaw vise.
(b)
Using a screwdriver remove the dust deflector.
2.
REMOVE INNER OIL SEAL
Using SST, remove the oil seal from the rear axle carrier.
SST 09308-000 1 0
3.
REMOVE HOLE SNAP RING
Using snap ring pliers, remove the hole snap ring.
Advertisement
Table of Contents
Troubleshooting
