Avaya Communication Manager Administrator's Manual page 138

Managing Phones Features
Setting up an Extension to Cellular Feature Access Button
Figure 6: Station screen - page 3
change station 1034
SITE DATA
Room:
Jack:
Cable:
Floor:
Building:
ABBREVIATED DIALING
List1:
BUTTON ASSIGNMENTS
1: call-appr
2: call-appr
3: call-appr
4: ec500
3
Select an available feature button under the
this example) and type ec500 (lower case) to administer an Extension to Cellular feature button
on the office phone.
4
Press
ENTER
NOTE:
The
the timer state.
5
Set the optional
administered feature button.
When the timer state is included, the Extension to Cellular user can activate a one-hour timer to
temporarily disable Extension to Cellular through this administered feature button.
6
Press
ENTER
The corresponding feature button on the office phone is now administered for Extension to
Cellular.
NOTE:
The feature status button on the office phone indicates the current state of Extension to
Cellular regardless of whether the feature was enabled remotely or directly from the office
phone.
For additional information, see the Avaya Extension to Cellular Administrator's Guide, 210-100-500_6.
138
List2:
Timer? y
.
subfield displays, and defaults to n. Leaving the default setting of n excludes
Timer
Timer subfield to y to include an Extension to Cellular timer state for the
.
Administrator's Guide for Avaya Communication Manager
STATION
Headset? n
Speaker? n
Mounting: d
Cord Length: 0
Set Color:
List3:
5:
6:
7:
8:
header (button 4 was used in
Button Assignments
Page 3 of 4
November 2003