Avaya Communication Manager Administrator's Manual page 185

To send LDN calls to the attendant during the day and to the TAAS bell at night:
1
Type change console-parameters and press
The Console Parameters
Calls in Queue Warning: 5
TIMING
Time Reminder on Hold (sec): 10
Time in Queue Warning (sec):
INCOMING CALL REMINDERS
No Answer Timeout (sec): 20
ABBREVIATED DIALING
List1: group
2
In the
DID-LDN Only to Night Ext
This allows only listed directory number calls (LDN) to go to the listed directory night service
number extension.
3
In the
Ext Alert Port (TAAS)
This is the port address assigned to the external alerting device.
4
Press
ENTER
The system is in night service.
Any DNIS extension 2000 calls now go to the TAAS bell.
Any "0" seeking calls now go to the TAAS bell.
Setting up trunk group night service
You can use trunk group night service if you want to direct individual trunk groups to night service. The
system redirects calls from the trunk group to the group's night service destination.
Trunk group night service overrides night station service. For example, we will say you activate trunk
group night service, and then your attendant activates night station service. In this case, calls to the trunk
group use the trunk night service destination, rather than the station night service destination.
Administrator's Guide for Avaya Communication Manager
November 2003
screen appears.
CONSOLE PARAMETERS
Attendant Group Name: Operator
COS: 0
Ext Alert Port (TAAS): 01A0702
CAS: none
SAC Notification? n
IAS (Branch)? n
IAS Att. Access Code:
Backup Alerting? n
1 List2:
COMMON SHARED EXTENSIONS
Starting Extension:
. field, type y.
field, type 01A070
to save your changes.
.
ENTER
Attendant Lockout? y
Night Service Act. Ext.:
IAS Tie Trunk Group No.:
Alternate FRL Station:
DID-LDN Only to LDN Night Ext? y
Return Call Timeout (sec): 10
Secondary Alert on Held Reminder Calls? y
Count:
.
Handling Incoming Calls
Setting up Night Service
COR: 0
Alerting (sec): 40
List3:
185