Avaya Communication Manager Administrator's Manual page 268

Managing MultiMedia Calling
Multimedia Call Handling
Related screens
•
System-Parameters Customer-Options
— Multimedia Call Handling (Basic)
— Multimedia Call Handling (Enhanced)
•
Feature Related System-Parameters
— Default Multimedia Outgoing Trunk Parameter Selection (p.2)
•
Maintenance-Related System Parameters
— Packet Bus Activated = y
— Minimum Maintenance Thresholds - MMIs, VCs
•
Data Module (type = 7500 or WCBRI)
— Multimedia (p. 1) = y
— XID (p. 2) = n
— MIM Support (p. 2) = n
•
Station
— MM Complex Data Ext (p. 1)
— H.320 Conversion (p. 2)
— Multimedia Early Answer (p. 2)
— Multimedia Mode (p.2)
— Service Link Mode (p.2)
— Feature Buttons (p.3) (optional)
•
Hunt Group
— MM Early Answer (optional)
•
Call Vector
— Multimedia (optional)
•
Feature Access Codes
— Basic Mode Activation (p.5)
— Enhanced Mode Activation (p.5)
— Multimedia Call Access Code (p.5)
— Multimedia Data Conference Activation & Deactivation (p.5)
The Multimedia Data Conference Deactivation FAC must be entered after you are active on a
multimedia call. To enter the FAC:
1
Select TRANSFER
2
Receive a dialtone
3
Dial the FAC
4
Receive a confirmation tone
5
Re-select the call appearance for the held multimedia call.
— Multimedia Multi-Address Access Code (p.5)
— Multimedia Parameter Access Code (p.5)
268 Administrator's Guide for Avaya Communication Manager
November 2003