Avaya Communication Manager Administrator's Manual page 273

•
mm-basic — This button is only allowed on the voice station of a multimedia complex. The
mm-basic button toggles a station between Basic and Enhanced modes. This button can NOT be
used to change the station's multimedia mode when the station has an active multimedia call
appearance.
Toggling between Basic and Enhanced mode changes the station's administered Multimedia
mode. When in Basic mode this field on the station screen will show basic. When in Enhanced
mode this field on the station screen will show enhanced. The current station Multimedia mode
will be saved to translation when a
•
mm-pcaudio — This button only works for an Enhanced multimedia complex voice station.
When originating or receiving a multimedia call, the audio path is connected to the voice station's
handset or speakerphone device. The mm-pcaudio button allows a user to switch the audio portion
of any call to their PC's audio input/output device (if available). To switch the audio path to the
PC while active on a call, the user presses the mm-pcaudio button (if off-hook you may now hang
up the handset). The mm-pcaudio button's status lamp will light up when the button is pushed to
move the audio path to the PC and remain lit while the audio path is at the PC device.
NOTE:
If you are on a voice only call, the voice path will switch to the PC device but you will get
muted or loopback video depending on the multimedia endpoint software.
A user may simply go off-hook on their voice station or press the speakerphone button to move
the audio path of a multimedia call from the PC back to the voice station. Pressing the
mm-pcaudio button while the status lamp is lit and the voice station's handset is on-hook will
disconnect the user from the active call.
•
mm-datacnf — Pressing the mm-datacnf button from any voice station that is participating in a
multimedia call will light the status lamp and alert the Avaya DEFINITY® Server that you want
to enable T.120 data collaboration with the other parties on the call. The button status lamp will
also light for other participants in the multimedia call who have mm-datacnf buttons.
Pressing this button from the voice station that enabled data collaboration on a multimedia mode
call will deactivate the data session and revert to a voice and video call. If you are participating on
a multimedia call with data collaboration, but did not initiate the data collaboration, and you press
this button, the status lamp led will flash momentarily and the T.120 data services will not be
terminated, (only the station that activated the collaboration session can deactivate it). This button
only works for stations connected to an Avaya DEFINITY Server equipped with an ESM adjunct.
•
mm-cfwd — The mm-cfwd button allows a user to indicate that multimedia mode calls will be
forwarded as multimedia mode calls to a specific forwarded-to destination. If voice call
forwarding is active and multimedia call forwarding is not active then multimedia calls going off
of the Avaya DEFINITY Server will be forwarded as voice only calls.
The mm-cfwd button status lamp will be lit to indicate that multimedia call forwarding is
activated. Pressing the mm-cfwd button when the lamp is lit will deactivate multimedia call
forwarding.
Note - pressing the mm-cfwd button is the same as dialing the regular call-fwd FAC followed by
the mm-call button or FAC followed by the desired forwarded-to extension digits.
•
mm-multinbr — The mm-multinbr call button is similar to the mm-call button. It allows
origination of a multimedia call from any voice station. It is used when the destination being
dialed requires a different address for each of the 2 B-channels. An example of this is Central
Office provided ISDN-BRI. This type of BRI line is provisioned with separate listed directory
numbers for each B-channel. In order to make a 2B multimedia call to such a device, two sets of
address must be entered.
Administrator's Guide for Avaya Communication Manager
November 2003
command is executed.
save translation
Managing MultiMedia Calling
Multimedia Call Handling
273