•
Manual Message Waiting — You must not administer a manual message waiting button
(man-msg-wt) with a MASI terminal as the referenced extension.
•
Manual Signaling — You must not administer a manual signaling button (signal) with a MASI
terminal as the referenced extension.
•
Night Service — You must not administer a MASI terminal as a night service destination.
•
Pull transfer — MASI terminals cannot perform a pull transfer operation. You must not
administer this feature on an Avaya DEFINITY Server where MASI is active. This applies only in
Italy.
•
Station Hunting — You must not administer a MASI terminal as part of a station hunting path.
•
Terminating Extension Groups — You must not administer a MASI terminal as part of a TEG.
Other interactions
The following section describes feature behaviors that may not be as expected, but that are not likely to
be destructive.
Attendant features
•
Dial Access to the Attendant — MASI terminals will be able to dial the attendant access code, if it
is administered in the MMCX dial plan.
•
Attendant Direct Extension Selection — Attendants are able to access MASI terminals via
buttons and busy lamp indicates status of the MASI terminal.
•
Emergency Access to the Attendant — MASI terminals have emergency access using the
attendant access code, if it is administered in the MMCX dial plan. However, off-hook alerting is
not administrable.
•
Attendant Intrusion — Attendants are able to activate intrusion towards MASI terminals.
•
Attendant Override — Attendants are not able to activate override towards MASI terminals.
•
Attendant Recall — MASI terminals cannot activate attendant recall.
•
Attendant Remote Trunk Group Select — Attendants cannot use this feature to select MASI
remote trunks.
•
Attendant Return Call — Operates normally if a MASI terminal is the called party.
•
Attendant Serial Call — Serial calls are denied if the calling party is an MMCX interface.
•
Attendant Straightforward Outward Completion — The attendant is able to complete calls to
Communication Manager trunks for MASI terminals.
•
Attendant Through Dialing —The attendant can use Through Dialing to pass dial tone to MASI
terminals.
•
Attendant Timers — Attendant timers work the same no matter what kind of terminal is involved.
•
Attendant Trunk Group Busy/Warning Indicators — You cannot administer Busy/Warning
indicators for MASI trunks because they are not standard Avaya Communication Manager trunks.
However, you can administer these indicators for the trunk group administered for MASI paths.
•
Attendant Trunk Identification — The attendant is not able to identify the trunk name via button
pushes.
Administrator's Guide for Avaya Communication Manager
November 2003
Managing MultiMedia Calling
Multimedia Applications Server Interface
DXS
259