Avaya Communication Manager Administrator's Manual page 352

Managing Trunks
Adding a CO, FX, or WATS Trunk Group
Instructions
As an example, we will set up a two-way CO trunk group that carries voice and voice-grade data only.
Incoming calls terminate to an attendant during business hours and to a night service destination the rest
of the time
To add the new CO trunk-group:
1
Type add trunk-group next and press
The Trunk Group screen appears. The system assigns the next available trunk group number to
this group. In our example, we're adding trunk group 5.
Group Number: 5
Group Name: Outside calls
Direction: two-way
Dial Access? n
Queue Length: 0
Comm Type: voice
Prefix-1? y
TRUNK PARAMETERS
Outgoing Dial Type: tone
Trunk Termination: rc
Disconnect Supervision -In? y
Answer Supervision Timeout: 10
2
In the
Group Type
This field specifies the kind of trunk group you're creating.
3
In the Group Name
This name will be displayed, along with the group number, for outgoing calls if you set the
Outgoing Display?
4
Type 85 in the
This field controls which users can make and receive calls over this trunk group. Assign a class of
restriction that's appropriate for the COR calling permissions administered on your system.
5
In the TAC
This field defines a unique code that you or your users can dial to access this trunk group. The
code also identifies this trunk group in call detail reports.
6
In the Direction
This field defines the direction of traffic flow on this trunk group.
7
Type 1234 in the
This field assigns an extension to which calls are routed outside of business hours.
352
TRUNK GROUP
Outgoing Display? n
Busy Threshold: 99
Country:
Trunk Type: ground start
Auto Guard? n Call Still Held? n
Out? n
field, type co.
field, type Outside calls.
field to y. You can type any name up to 27 characters long in this field.
COR field.
field, type 105.
field, type two-way.
Night Service field.
Administrator's Guide for Avaya Communication Manager
.
ENTER
Group Type: co
COR: 85 TN: 1__
Night Service: 1234
Incoming Destination: attd
Auth Code? n Digit Absorption List: _
Trunk Flash? n
Disconnect Timing(msec): 500_
Sig Bit Inversion: none
Trunk Gain: high
Receive Answer Supervision? n
CDR Reports: y
TAC: 105
Toll Restricted? y
Cut-Through? n
November 2003