Avaya Communication Manager Administrator's Manual page 359

Hide thumbs Also See for Communication Manager:
Table of Contents

Advertisement

Group Number: 5__
Group Name: Outside calls
Direction: two-way_
Dial Access? n
Queue Length: 0__
Comm Type: voice
TRUNK PARAMETERS
Trunk Type (in/out): wink/wink___
Outgoing Dial Type: tone_____
Digit Treatment: __________
Expected Digits:__
Analog Loss Group: ___
Incoming Dial Tone? y
Disconnect Supervision - In? y
Answer Supervision Timeout: 0__
2
In the
Group Type
This field specifies the kind of trunk group you're creating.
3
In the
Group Name
This name will be displayed, along with the group number, for outgoing calls if you set the
Outgoing Display?
4
Type 85 in the
This field controls which users can make or receive calls over this trunk group. Assign a class of
restriction that's appropriate for the COR calling permissions administered on your system.
5
In the
TAC
This field defines a unique code users can dial to access this trunk group.
6
In the
Direction
This field defines the direction of traffic flow on this trunk group.
7
Type 1234 in the
This field assigns an extension to which calls are routed outside of business hours.
8
In the
Comm Type
This field defines whether a trunk group can carry voice, data, or both. Analog trunks only carry
voice and voice-grade data. If you're administering a T1 connection in North America, type
rbavd in this field.
9
In the
Trunk Type
This field tells the system what kind of signaling to use on this trunk group. Because we're
receiving and sending digits over this trunk group, we're using wink/wink signaling to minimize
the chance of losing part of the digit string in either direction.
Administrator's Guide for Avaya Communication Manager
November 2003
Outgoing Display? n
Busy Threshold: 99_
BCC: 0
field, type tie.
field, type Outside calls.
field to y. You can type any name up to 27 characters long in this field.
field.
COR
field, type 105.
field, type two-way.
field.
Night Service
field, type voice.
field, type wink/wink.
Adding a Tie or Access Trunk Group
TRUNK GROUP
Group Type: tie
COR: 85_
Trunk Signaling Type: ____
Incoming Destination: _______
Auth Code? n
Trunk Flash? n
Incoming Rotary Timeout(sec): 5_
Incoming Dial Type: tone____
Disconnect Timing(msec): 500_
Sig Bit Inversion: none
Digital Loss Group: ___
Out? n
Receive Answer Supervision? y
Managing Trunks
Page 1 of X
CDR Reports: y
TN: 1__
TAC: 105_
Night Service: 1234
Digits: ____
359

Advertisement

Table of Contents
loading

Table of Contents