Avaya Communication Manager Administrator's Manual page 457

Figure 50: DCP PC interface configuration (Group 1)
Figure notes
1 IBM-compatible PC with DCP
Interface card
2 IBM-compatible PC with DCP
Interface card
3 DCP
The group 2 configurations link to the server using a PC/ISDN Interface card installed in the PC. This
group can include a stand-alone PC terminal, or up to 4 telephones, handsets, or headsets. Group 2
(shown in Figure 47, ISDN—BRI PC interface configuration (Group 2),
Interface cards (up to four cards) which plug into expansion slots on the PC. These cards each provide 2
standard 8-pin modular-jack connections for both line connections (to the server or media server) and
phone connections. A standard 4-pin modular jack is also available for use with a handset or headset.
Administrator's Guide for Avaya Communication Manager
November 2003
4 DCP telephone
5 Avaya (Digital Line, Digital Line
(16-DCP-2-Wire), or Digital Line
(24-DCP-2-wire) circuit pack)
6 Host
on page 440) uses PC/ISDN
Managing Data Calls
PC Interface
457