Avaya Communication Manager Administrator's Manual page 111

6
Log into SAT and enter change tftp-server and press
The TFTP Server
change tftp-server
Local Node Name:
TFTP Server Node Name:
TFTP Server Port: 69
File to Retrieve:
Filename in Memory:
7
In the
Local Node Name
The node must be assigned to a CLAN ip-interface or procr (processor CLAN).
8
In the
TFTP Server Node Name
Names screen.
9
In the
TFTP Server Port
begins.
10
In the
File to Retrieve
11
Press
ENTER
The file transfer begins.
12
Enter display tftp-server and press
A
"File download successful"
displays the file size and the file name in memory.
File download to the 2420 DCP telephone
Before you start
You must have console permissions to download someone else's phones.
NOTE:
Steps 1 through 3 need be done only once to set up the FAC for file downloads. Thereafter,
start at step 4 to download files.
1
Type change feature-access-codes and press
2
In the Station Firmware Download Access Code
This number can be any valid FAC as defined in the dial plan.
3
Press
ENTER
4
Take the 2420 DCP phone off-hook.
5
Dial the Station Firmware Download FAC (for instance, *36).
Administrator's Guide for Avaya Communication Manager
November 2003
screen appears.
TFTP Server Configuration
File Status:
File Size:
field, enter the valid local node name from the IP Node Names screen.
field, enter the valid TFTP server node name from the IP Nodes
field, enter the TFTP server port number from where the file download
field, enter the name of the file to be retrieved.
to save your changes.
ENTER
message appears when the file transfer completes. It also
to save your changes.
.
ENTER
to view the status of the file transfer.
.
ENTER
field, enter *36.
Managing Phones
2420 DCP telephone
Page 1 of 1
111