Avaya Communication Manager Administrator's Manual page 247

•
Enabled
•
Established
•
Dest. Digits
•
Mach. ID
Once you establish and enable the signaling group, you need to verify that it is active. Use the command
status signaling-group signaling-group#
[print] to determine if the link is active.
Step 6 — Administer ISDN-PRI trunk group
Use the command
description of the ISDN-PRI trunk group, see
Establish an ISDN-PRI trunk group with the following attributes:
Page 1
•
Group Type = isdn-pri
•
TAC = valid TAC that conforms to your existing dial plan
•
Direction = two-way
•
Service Type = tie
•
CDR Reports = n
You must also administer the PRI link from the MMCX to the ECS, using the MMCX administration
terminal. See them MMCX System Administrator's Guide & Technical Reference Manual for information
on the command.
addpri
Step 7 — Administer MASI Path Parameters
Use the
change masi path-parameters
Administrator's Guide for Avaya Communication Manager
November 2003
— Indicates the state of the connection - enabled (y/n)
— Value of established flag (as-needed/permanent)
— The MMCX extension that indicates the TSC destination
— MASI node number
or
add trunk-group xxx to access the Trunk Groups screen. For a more detailed
command to access the MASI Path Parameters screen.
Multimedia Applications Server Interface
status tsc-administered signaling-group# [/tsc-index]
Trk Grp(s) on page 962.
Managing MultiMedia Calling
247