Avaya Communication Manager Administrator's Manual page 419

Table 7: Special characters 2 of 2
Character
% (mark)
or
UNDERLINE
@
Each line of dialing information can contain up to 42 characters (the + an
each).
Examples of dialing are:
•
DIAL: 3478
•
DIAL: 9+(201) 555-1212
•
DIAL: 8, 555-2368
•
DIAL: 9+555-2368+%9999+123 (remote access)
The following call-progress messages and their meanings are provided for DCP and ISDN-BRI modules.
Table 8: Call-progress messages 1 of 2
Message
DIAL:
CMD
RINGING
BUSY
ANSWERED
ANSWERED - NOT
DATA
TRY AGAIN
DENIED
ABANDONED
NO TONE
Administrator's Guide for Avaya Communication Manager
November 2003
Use
indicates digits for end-to-end signaling (touch-tone).
This is required when the trunk is rotary. It is not
required when the trunk is touch-tone.
corrects previously typed characters on the same line
BACKSPACE
deletes the entire line and starts over with a new DIAL:
prompt
Application Meaning
DCP Equivalent to dial tone. Enter the desired
number or FAC followed by Enter.
BRI Equivalent to dial tone. Enter the desired
number or FAC followed by Enter.
DCP, BRI Equivalent to ringing tone. Called terminal is
ringing.
DCP, BRI Equivalent to busy tone. Called number is
busy or out of service.
DCP, BRI Call is answered.
DCP Call is answered and a modem answer tone is
not detected.
DCP, BRI Equivalent to reorder tone. System facilities
are currently not available.
DCP, BRI Equivalent to intercept tone. Call cannot be
placed as dialed.
DCP, BRI Calling user has abandoned the call.
DCP, BRI Tone is not detected.
Managing Data Calls
Data Call Setup
2 of 2
characters count as two
d %
1 of 2
419