Avaya Communication Manager Administrator's Manual page 175

2
They dial their "forwarding-to" off-site or on-site number.
In this example, enter 2081. This is a local number; for off-site forwarding, include the AAR/ARS
feature access code.
3
When they hear the 3-beep confirmation tone, they hang up.
Changing the forwarding destination remotely
Now that you have set up all of the required system administration for call forwarding, have your users
use this procedure if they want to change their call forwarding destination from a telecommuting
(off-site) phone.
1
They dial their telecommuting extension.
See Telecommuting Access
2
When they get dial tone, they dial either their Extended Call Forward Activate Busy/DA or the
Extended Call Forward Activate All feature access code.
In this example, enter *61 for the
3
When they get dial tone, they dial their extension number and press the '#' key.
In this example, enter 1014, then #.
4
Even though there is no dial tone, they dial their security code and press the '#' key.
In this example, enter 4196, then #.
5
When they get dial tone, they dial their "forwarding-to" off-site or on-site number.
In this example, enter 9-555-2081.
6
When they hear the 3-beep confirmation tone, they hang up.
Allowing users to change coverage remotely
This section shows you how to allow users to change their call coverage path from a local or
telecommuting (off-site) phone.
Instructions
To change call coverage from off-site:
1
Type change feature-access-codes and press
The Feature Access Code
2
In the Change Coverage Access Code
Use the *85 feature access code to change a coverage path from a phone or remote station.
3
Press
ENTER
4
Type change cor and press
The Class of Restriction
5
In the
Can Change Coverage
This permits users to select one of two previously administered coverage paths.
6
Press
ENTER
Administrator's Guide for Avaya Communication Manager
November 2003
on page 1233 for more information. In this example, enter 555-9126.
Extended Call Forward Activate All
screen appears.
to save your changes.
.
ENTER
screen appears.
field, type y.
to save your changes.
.
ENTER
field, type *85.
Handling Incoming Calls
Setting up Call Forwarding
number.
175