Avaya Communication Manager Administrator's Manual page 235

7
Type change ip-network-map and press
The IP Address Mapping screen displays.
change ip-network-map
FROM IP Address
1.__2.__3.__0
1.__2.__4.__4
1.__2.__4.__5
1.__2.__4.__6
___.___.___.___
___.___.___.___
___.___.___.___
___.___.___.___
___.___.___.___
___.___.___.___
___.___.___.___
___.___.___.___
___.___.___.___
8
In the
From IP Address
9
In the To IP Address
10
In the Subnet or Mask
11
In the Region
12
Press
ENTER
13
Type change ip-network-region 3 and press
The IP Network Region screen displays.
change ip-network-region 3
Region: 3
Location: 11
Name: North
AUDIO PARAMETERS
Codec Set: 1
UDP Port Min: 2048
UDP Port Max: 3049
DIFFSERV/TOS PARAMETERS
Call Control PHB Value: 34
802.1P/Q PARAMETERS
Call Control 802.1p Priority: 7
H.323 IP ENDPOINTS
H.323 Link Bounce Recovery? y
Idle Traffice Interval (sec): 20
Keep-Alive Interval (sec): 6
14
In the Name
15
In the Location
Administrator's Guide for Avaya Communication Manager
November 2003
IP ADDRESS MAPPING
(TO IP Address or Mask)
1.__2.__3.255
1.__2.__4.__4
1.__2.__4.__5
1.__2.__4.__9
___.___.___.___
___.___.___.___
___.___.___.___
___.___.___.___
___.___.___.___
___.___.___.___
___.___.___.___
___.___.___.___
___.___.___.___
field, enter the IP address for the remote station in Germany.
field, enter the IP address of your system.
field, enter the subnet mask value of your network.
field, enter a number that is not being used. In this example, enter 3.
to save your changes.
IP NETWORK REGION
Audio PHB Value: 46
Audio 802.1p Priority: 6
Keep-Alive Count: 5
field, enter the location name for familiarity.
field, enter the number from the Locations screen. In this example, it was 11.
ENTER.
Subnet 802.1Q
Region VLAN
24 __1 ___3
32 __2 ___0
__ __3 ___0
__ __4 ___4
__ ___ ____
__ ___ ____
__ ___ ____
__ ___ ____
__ ___ ____
__ ___ ____
__ ___ ____
__ ___ ____
__ ___ ____
ENTER.
Home Domain:
Intra-region IP-IP Direct Audio: no
Inter-region IP-IP Direct Audio: no
IP Audio Hairpinning? y
RTCP Reporting Enabled? y
RTCP MONITOR SERVER PARAMETERS
Use Default Server Parameters? y
Server IP Address:
Server Port: 5005
RTCP Report Period(secs): 5
AUDIO RESOURCE RESERVATION PARAMETERS
RSVP Refresh Rate(secs): 15
Retry upon RSVP Failure Enabled? y
RSVP Profile: guaranteed-service
RSVP unreserved (BBE) PHB Value: 40
Routing Outgoing Calls
Location by Region
Page 1 of X
Emergency
Location
Extension
________
________
________
________
________
________
________
________
________
________
________
________
________
Page 1 of 19
. . .
RSVP Enabled? y
235