Avaya Communication Manager Administrator's Manual page 495

Figure 58: Add Trap Destination screen
3
Check the Check to enable this destination box.
4
In the IP address field, enter the IP address for destination.
5
Select the SNMP version for the destination of the traps. You may select one or more than one
version.
6
Complete the fields associated with the version(s) you selected:
— SNMP version 1
In the Community name field, enter the SNMP community name.
— SNMP version 2c
— SNMP version 3
Administrator's Guide for Avaya Communication Manager
November 2003
a
Select the Notification type: trap or inform.
b
In the Community name field, enter the SNMP community name.
a
Select the Notification type: trap or inform.
b
In the User name field, enter an SNMP user name that the destination will
recognize.
Administering Media Servers
SNMP Agents
495