Setting Up Definity Lan Gateway - Avaya Communication Manager Administrator's Manual

Setting up DEFINITY LAN Gateway

Before you start
This section describes pre-administrative tasks associated with the Co-Resident DLG.
For S8100 Media Server Configurations
If you want to use a TN799 C-LAN circuit pack as the Ethernet Interface for the Co-Resident DLG,
proceed as follows:
1
Type display system-parameters customer-options and press
2
Go to page 2 and make sure the
Adjunct Links
3
Type display node-names ip and press
Make sure that there is a node name associated with the C-LAN. If there is not a node name, add
one.
4
Type display ip-interfaces and press
Make sure the C-LAN is administered and its Ethernet port is enabled. If the C-LAN is not listed
(the Type
in the Node Name / Local Node
5
Type list data-module and press
Make sure that the Ethernet port on the C-LAN is administered. If the Ethernet port is not listed,
add it with the
field should be port 17 on the TN799).
Port
If you want to use a TN2314 circuit pack as the Ethernet Interface for the Co-Resident DLG, proceed as
follows:
1
Type display system-parameters customer-options and press
2
Go to page 2 and make sure the
Adjunct Links
3
Go to page 4 and make sure that the
4
Type display ip-interfaces and press
Make sure the PROCR is administered and its Ethernet port is enabled. If the PROCR is not listed
(
PROCR
in the Node Name
Administrator's Guide for Avaya Communication Manager
November 2003
ASAI Link Core Capabilities
fields are y, and the
field should display
C-LAN
field), add a C-LAN.
ENTER
add data-module command (the
ASAI Link Core Capabilities
fields are y, and the
should appear in the Type field and the previously administered node name should appear
field), add a PROCR.
Setting up DEFINITY LAN Gateway
and/or
Co-Res DEFINITY LAN Gateway
.
ENTER
.
ENTER
, and the previously administered node name should appear
.
Service Type
and/or
Co-Res DEFINITY LAN Gateway
Processor Ethernet field is y.
.
ENTER
Managing Data Calls
.
ENTER
Computer Telephony
field is y.
field should be Ethernet and the
.
ENTER
Computer Telephony
field is y.
473