Avaya Communication Manager Administrator's Manual page 226

Routing Outgoing Calls
Modifying Call Routing
To add this non-local area code:
1
Type list ars route-chosen 14152223333 and press
You can use any 7-digit number after 1 and the old area code (415). We used 222-3333.
The ARS Route Chosen Report screen appears.
2
Write down the
In this example, the
.
fnpa
3
Type change ars analysis 1650 and press
The AAR and ARS Digit Analysis Table
1____________________11
167__________________11
1800_________________11
2___________________ 7
3___________________ 7
4___________________ 7
5___________________ 7
7___________________ 7
8___________________ 7
911_________________ 3
976________________ _11
4
Move to a blank
If the dialed string is already defined in your system, the cursor appears in the appropriate
field, where you can make changes.
String
5
Enter 1650 in the
6
Enter the minimum and maximum values from step 2 in the
In our example, enter 11 in each field.
7
Enter the route pattern from step 2 in the
In our example, enter 30.
8
Enter fnpa in the
9
Enter the node number from step 2 in the
For our example, leave the node number blank.
10
Press
ENTER
226
Location: 1
Dialed
Node Location
String
141
l
Total Min , Total Max
Total Min is
11
ARS DIGIT ANALYSIS TABLE
Location:
Dialed Total
String Min Max
11
11
11
7
7
7
7
7
7
3
11
field.
Dialed String
field.
Dialed String
Call Type field.
to save your changes.
Administrator's Guide for Avaya Communication Manager
.
ENTER
ARS ROUTE CHOSEN REPORT
Partitioned Group Number:
Total Route
Min Max Pattern
11 11 30
, Route Pattern , and Call Type
, Total Max is , Route Pattern
11
.
ENTER
screen appears.
all
Route Call Node ANI
Pattern Type Num Req
30 fnpa ___ n
30 fnpa ___ n
30 fnpa ___ n
2 hnpa ___ n
2 hnpa ___ n
2 hnpa ___ n
2 hnpa ___ n
2 hnpa ___ n
2 hnpa ___ n
1 emer ___ n
deny hnpa ___ n
Total Mn
Route Pattern field.
Node Num field.
1
Call
Type Number
fnpa
values from this screen.
is , and the Call Type
30
Percent Full: 6
Dialed
and fields.
Total Mx
November 2003
al
is