Default Dialing; Data Restriction - Avaya Communication Manager Administrator's Manual

Managing Data Calls

Default Dialing

Default Dialing
Default Dialing provides data-terminal users who dial a specific number the majority of the time a very
simple method of dialing that number. Normal data terminal dialing and alphanumeric dialing are
unaffected.
Default Dialing enhances data terminal (keyboard) dialing by allowing a data-terminal user to place a
data call to a preadministered destination by either pressing a
terminals using DCP data modules) or typing d and pressing
terminals using ISDN-BRI data modules). The data-terminal user with a DCP data module can place calls
to other destinations by entering the complete address after the DIAL: prompt (normal data terminal
dialing or alphanumeric dialing). The data-terminal user with an ISDN-BRI data module can place calls
to other destinations by typing d, a space, the complete address, and press
NOTE:
DU-type hunt groups connecting the system to a terminal server on a host computer have
hunt-group extensions set to no keyboard dialing.
For the AT command interface supported by the 7400A/7400B/8400B data module, to dial the default
destination, enter the ATD command (rather than press return).
Administering Default Dialing
1
You can use an abbreviated dialing list for your default ID. See
for more information.
2
On the Data Module screen, administer the following fields:
•
Special Dialing Option
•
Abbreviated Dialing List
•
AD Dial Code

Data Restriction

Data Restriction protects analog-data calls from being disturbed by any of the system's overriding or
ringing features or system-generated tones.
Data Restriction applies to both voice and data calls.
Once you administer Data Restriction for an analog or multiappearance telephone or trunk group, the
feature is active on all calls to or from the terminal or trunk group.
NOTE:
Do not assign Data Restriction to attendant consoles.
426
as default.
, enter the list to use.
.
Administrator's Guide for Avaya Communication Manager
at the DIAL: prompt (for data
ENTER
at the CMD: prompt (for data
ENTER
after the CMD: prompt.
ENTER
Abbreviated dialing
November 2003
on page 1345