Avaya Communication Manager Administrator's Manual page 301

Status commands
The status commands for data module, station, trunk, and attendant provide the conference ID and
endpoint ID for any of these involved in an active multimedia conference.
Figure 39: Status Station 1002 — General Status screen
status station 1002
Ring Cut Off Act? no
Active Coverage Option: 1
Message Waiting:
Connected Ports:
The following fields specific to multimedia appear on the status station, attendant, data module and trunk
screens.
•
MM Conference ID — This field appears only if the station is active on a multimedia
conference. It displays the ID for the conference. Enter this number with the status conference
command to get more information about this conference.
•
MM Endpoint ID — This field appears only if the station is active on a multimedia conference.
It displays the endpoint ID for the station. Enter this number with the status conference endpoint
command to learn more about this endpoint's involvement in the conference.
List commands
The list multimedia endpoints command shows you all the multimedia data modules that exist in
your system, and their associated telephones, if any. The list multimedia H.320-stations command
shows you all the stations that are administered for H.320 conversion. The list multimedia ip-stations
command shows you the administered IP stations/modules and whether they are registered.
Administrator's Guide for Avaya Communication Manager
November 2003
Type: 7405D
Extension: 1002
Port: 01C0702
Call Parked? no
ACD STATUS
Agent Logged In Work Mode
On ACD Call? no
GENERAL STATUS
Service State: in-service/on-hook
Maintenance Busy? no
SAC Activated? no
User Cntrl Restr: none
Group Cntrl Restr: none
CF Destination Ext:
MM Conference ID:
MM Endpoint ID:
HOSPITALITY STATUS
AWU Call At:
User DND: not activated
Group DND: not activated
Room Status: non-guest room
Managing MultiMedia Calling
Enhanced Mode MM Complex
301