Managing Displays; Displaying Caller Information; Displaying Ani Calling Party Information - Avaya Communication Manager Administrator's Manual

6

Managing Displays

Displaying Caller Information

This chapter provides information on the messages that appear on the read-out screen on display phones.
Your system uses automatic incoming call display to provide information about incoming calls to a
display phone that is in use, or active on a call. The information is displayed for 30 seconds on all phones
except for CALLMASTER phones, where the display goes blank after 30 seconds. However, the
information for each new call overrides the existing message.
Call information appears on the display only if the call terminates at the phone. For example, if the call is
forwarded to another extension, no call information appears.
See Telephone displays
for the messages that appear on the display.

Displaying ANI Calling Party Information

Calling party information may consist of either a billing number that sometimes is referred to as
Automatic Number Identification (ANI), or a calling party number. Your phone may display the calling
party number and name, or the incoming trunk group name.
Administrator's Guide for Avaya Communication Manager
November 2003
on page 1682 for more information on the buttons and languages you can set up
Managing Displays
Displaying Caller Information
157