Avaya Communication Manager Administrator's Manual page 270

Managing MultiMedia Calling
Multimedia Call Handling
Figure 35: Data Module screen (Page 1 of 2)
Data Extension: 65001
ABBREVIATED DIALING
List1: ____________
SPECIAL DIALING OPTION: hot-line
HOT LINE DESTINATION
CIRCUIT SWITCHED DATA ATTRIBUTES (used for modem pooling)
Default Duplex: full
DATA MODULE CAPABILITIES
Default ITC: restricted
Figure 36: Data Module screen (Page 2 of 2)
BRI LINK/MAINTENANCE PARAMETERS
•
— Set the data module type to 7500 or WCBRI.
Type
•
Multimedia
System-Parameters Customer Options screen. Enter y to enable this data module to be multimedia
compliant.
•
MM Complex Voice Ext: (display only) — This field contains the number of the associated
telephone in the complex. This is a display-only field, and is blank until you enter the data module
extension in the Station screen MM Complex Data Ext field. Once you have done that, these two
extensions are associated as two parts of a multimedia complex.
•
XID and MIM Support — Valid entries are y (default) and n. These fields must be set to n.
Station screen
After you have administered the BRI data module, use the Station screen to associate it with a voice
station to screen a multimedia complex. This is a one-to-one relationship: you can administer only one
station and one data endpoint per multimedia complex. Neither the voice station, nor the data endpoint
can be a member of another multimedia complex.
NOTE:
A BRI station cannot be part of a multimedia complex.
270
Name: ___________________________
Type: 7500_______ COS: 1_
Port: _____
Abbreviated Dialing Dial Code (From above list): _
Default Mode: async
XID? n Fixed TEI? n
MIM Support? n
— This field appears on the data module screen only if MM is set to y on the
Administrator's Guide for Avaya Communication Manager
DATA MODULE
COR: 1_ MM Complex Voice Ext: 67434
Default Speed: 1200_
Default Data Application? M2_A
DATA MODULE
TEI: ___
Page 1 of 2
Multimedia? y
Page 2 of 2
November 2003